Windows 7 Loader DAZ – Home

licensed pc with daz windows 7 loader in action

Windows 7 Activator DAZ v2.2.2

Hi everybody! We have created this amazing website in order to provide you with the best win 7 activation tool available today – windows 7 loader DAZ !

People really know our software because it’s spread worldwide pretty fast after first release. But for those who don’t we suggest reading about our activator below. Beware that the newest version of DAZ Loader today is v2.2.2. If we will release an update for the our tool you always will find it right here at our site. There can’t be working newer version than v2.2.2 so don’t be fooled if you find higher on other websites. This is  just a trap..

Our windows activator for a fact used by hundreds of millions users globally and we are proud of that. Main reason is because people just can’t activate their windows 7 pc’s. There could be a lot of reasons for that: lost license key, scratched off key or people just never had one. Students can get this key usually for free so they don’t need our tools like MIT offers it’s students free windows 7 version. For others you probably have to use our tool – windows 7 loader DAZ. It is famously known of bypassing really hard MS WAT security. Our tool is arguably safest windows 7 activator key based exploit ever created by any group. Because it is inserting windows serial key directly into bios system so it can’t be reset by Microsoft so easy. What makes our app special is that it can make any version of windows genuine except for very rear build one in a million.. Another feature is that app let you use windows updates with no detection from microsoft so it’s completely stealthy.

Most Problems People Get with Windows 7 Loader

If you came up with not genuine error and black screen  you need to reset windows 7 activation. This can be done with MBR Regenerator tool reseting back to 30 days trial. After that we suggest that you immediately use DAZ windows loader to activate windows. This activator works with all windows 7 versions from Starter up to the Ultimate with some rare exceptions. For more information check about & releases section.

Instructions How to Download and Use our Activation Tool

To Download DAZ Windows Loader Press the Button Bellow

Important! Make sure that before installing windows 7 you boot cd or flash drive into legacy bios mode. Sometimes it works on UEFI sometimes don’t so it depends on your hardware. Safe bet is legacy bios mode. After that you have to format your hard drive to NTFS format. Just after windows installation apply our DAZ Activator with no other apps running. After activation you can delete our loader.

Also if already installed delete KB971033 windows update and don’t install kb3109094 because they trying to detect fake activation and reset your license.

For WINDOWS UPDATE FAIL problems read Commom Issues & FAQ section.

These are the most common problems  users experience with our win 7 activator. Also after installing windows do not install any antivirus and firewall as i have seen problems with ms security essentials! Only after you install daz  activator then install anything you want..

If you have any questions feel free to fill up the contact form or catch us on Facebook. Also from now you can ask your questions in the comment section bellow. Because we give you the fastest response there.  Update: added new toolkit as a last resort for people who are struggling with activation.

Always check MD5 Hash and SHA1 of the windows 7 loader .exe after extracting files to verify that you are using our activation tool (you can find free checker at our useful software section).

File : Windows Loader.exe

MD5 : 323c0fd51071400b51eedb1be90a8188

SHA-1 : 0efc35935957c25193bbe9a83ab6caa25a487ada

If you have some kind of problems with our windows 7 activator DAZ remember to check Common Issues & FAQ section for various troubleshooting.

We hope you will enjoy using this amazing activation tool and remember to like and subscribe to us on the right side of the page!

We are very grateful for your support! – DAZ Team

991 comments on “Windows 7 Loader DAZ – Home
  1. systint says:

    Bonjour,
    Merci beaucoup pour ton nouveau fameux chargeur qui marche à merveille.
    Ma question y a-t-il une chance pour passer à Win10 car je n’ai pas encore reçu le fameux pavillon blanc de Windows GWX?
    Cordialement.

    • DAZLoader says:

      as i understood – google translate helped me 😀 you are asking about windows 10 update.. You need to download optional update KB 3035583 , after that restart pc for a few times and wait a day or two and you will get an icon that your pc is ready to be upgraded to windows 10..

  2. Jão says:

    DAZ

    Good work, my answer is after installation your loader (2.2.2) install kb971033, but system very, very working original.

  3. Petabyte says:

    Hi, i got one quick question. Can i activate windows 7 with the loader and then download Win 8.1 via microsoft assistant and then if needed activate that version with windows8loader?

    Tnx in advance for a quick answer!

    • DAZLoader says:

      You mean if they let you download windows 8.1 no they won’t.. Wait few more days until windows 10 released

  4. TheFullMetal says:

    Hi Daz, iive been having trouble trying to activate widows 7 x64 on my samsung 850 EVO 250 gb SSD. First i tried booting the ssd in legacy bios but the before the windows installation gets to finish it would give an error, saying that the hard drive can’t boot winodws because of mbr problems or something like that. Then i try installing windows trough uefi and the installation would finish but would not allow me to activate it with the loader. I also notice that after creating a new partition on my ssd trough uefi, the process would create two addtional partitions, one MSR (reserved) and the other one System. Creating the new partition trough legacy bios would only make one partition. Anyway you could help me activate my windows? Thank you beforehand and regards!

    • TheFullMetal says:

      Forgot to add that the loader says “Unsupported partition Table” i tried the solution that the readme indicated, formatted many times on legacy bbios but would get same error evrytime, i remenber reading somewhere that SSD’s don’t work on mbr format or something like…

      • DAZLoader says:

        it will work.. boot into mbr and format drive from windows installation, then install windows after that first thing to do is launch loader and deleted that windows update.. Many people stuck because they update their windows first and write antivirus firewall etc. which blocks our loader

      • The Full Metal says:

        Hello Daz, I appreciate all your help, i was able to activate windows thanks to the steps to follow information involving opening the command line when selecting the hard drive and typing the words, all before windows installation. Man thanks for the help again and god bless.

    • DAZLoader says:

      Hi you must format to ntfs and install windows on legacy boot mode.. I don’t know what error is that but it is the cause of it.. Try putting it in another pc and format the hard or use some kind of iso cd with format tool in it..

  5. Fahd says:

    I have installed windows 7 ultimate but it’s not activated. By installing Windows7 loader can i activate it.

  6. adam says:

    i have installed windows7 pro before 1 month i ahve installed all updates and i have wrote a key which is not to working and it is say it will activate in 30 days automatically.Also i ahve games programms etc.Can i use windows loader to activate windows or i must format my pc

    • DAZLoader says:

      just try and use it.. Don’t forget to delete that windows update which detects loader.. If that doesn’t work use MBR regenerator and then apply our windows loader

  7. OMG says:

    OMG dude thank you so much! activated win without problem! greetings from California!

  8. Pigghi says:

    Hi!
    My frien has got a laptop and now has got the WGA message.
    I don’t know if the guy who installed windows 7 on it used any loader.

    Can I use DazLoader directly or is better searching for kb971033 update and removing it before the activation?

    I’m sorry for my english and tank you for the Loader, it has been very useful many times!

  9. Eric says:

    I have been experimenting with creating system images for backup/restore purposes using both the Windows 7 backup utility and Paragon Hard Disk Manager. If I attempt to restore from one of these system images though, it appears they write a new boot sector which overwrites the loader. Is there a way to avoid this?

    • DAZLoader says:

      loader is implemented in bios so my answer should be no..

      • Eric says:

        Damn. For whatever reason, though, using a system image created from Windows Backup and restoring from a Windows recovery disk leaves the loader intact. Paragon recovery method overwrites it.

  10. DBGarza says:

    Something odd happened to me a couple of days ago. All was going fine, I had this Windows 7 Ultimate installation activated with the loader for a while now (few years actually) and yesterday July 4 around 6 am my desktop background went black. Icons and everthing worked, just the wallpaper went black and I couldn’t change it. I logged off windows and then started windows session again and the wallpaper returned. I thought it was just something due to being playing a game so I didn’t give much thought.

    All saturday everything seemed to be fine, wallpaper was there and such. but then today around 3 am again the desktop went black. I went to system properties and noticed that the activation was missing. It said id not available and status not available.

    First I used the wat removal program and it let me use the loader after a reboot and windows appeared activated again, but a couple of hours later the desktop went black again, this time it let me change it through the personalize window since on system properties kept saying that windows was activated.

    Then I used the MBR Regenerator but unchecking the regenerate activation system and all seems to be fine for now.

    My doubt is if any of the June’s updates might had to do with my years lasting activation being removed, or if it was because I enabled Intel’s virtualization on the bios to install a VM I needed. The only other thing I installed was Sony Vegas and updated Skype to version 7.6.0.105

    It was pretty odd because it never failed till now. I don’t even have the KB971033 update installed at all.

    What do you think caused the problem? maybe the Reserve Windows 10 had something to do with that?

    • DBGarza says:

      I just used MBR Regenerator with the full process I mean regenerating activation too to return to the 30 dias trial just in case and reactivated again with the loader.

      I will be checking tonight to see if the wallpaper goes black again.

      But it sure was odd. I’m thinking it was either the Reserve Windows 10 thing or it was enabling Intel Virtualization on the bios, can’t seem to find another explanation.

    • DAZLoader says:

      somehow your windows was detected there could be many reasons regarding all ms products.. If it’s all right now then don’t worry..

  11. prasanth says:

    super

  12. Ragna says:

    If you have two HDD’s should do format them both with NTFS? And will this loader work if you download windows 7 with SP1 and delete the KB971033 windows update before running the loader?

    • Ragna says:

      I’m sorry, the previous comments didn’t seem to load for me. I thought my comments didn’t go through. Thx for your answers.

      • Ragna says:

        I’m sorry again for adding another comment, but I forgot to ask. If you removed the KB971033 file, and ran the loader successfully. Can you update your windows? Or will the KB91033 file try to install itself again?
        .

      • DAZLoader says:

        update windows and deselect that update

  13. Basti says:

    I hope it work later with win 10 🙂

    Thanks for the work

  14. MG says:

    Hello DAZ,
    I found this website…right after I was at THIS website (latest.windowsloaderdaz.com/) and it has all similar info to this one. I downloaded from that site and it gave me a 2.4 loader…but it says here that there is no newer version…so….are both yours? or, is someone faking you out? Please advise…I will be installing Win 7 Pro 64 soon and want to do it right the first time.

    PS. I saw your posts in the MDL forums…great work!!
    Thanks

    • DAZLoader says:

      that site is FAKE! there is no newer version than v2.2.2

      • Mg says:

        Thanks for reply. Will use v2.2.2.

        Now, am still bit confused by couple of steps. Tell me where I’m wrong or missing something.
        1. New built PC with SD boot drive. Do clean install of Windows 7 pro 64 bit.
        2. Format sad upon install as NTFS.
        3. Finish install windows.
        4. Remove or unchecked KB971033.
        5. Without installing any antivirus, now run loader 2.2 from within windows, yes??
        6. Success!!
        That’s it…correct?

  15. fethi says:

    thanks

  16. Ragna says:

    Have another question, you said to format your harddrive with NTFS. What if you have two harddrives, do you have to format them both with NTFS?

  17. Ragna says:

    Hey, I’ve read that if you install windows 7 x64 professional SP1 that the KB971033 file comes with it automatically. I would install windows 7 x64 professional without the SP1 but I can’t find any reliable links. Can you easily remove the KB971033 file after you install?

  18. teste id moderated.. says:

    I dont use if this forum is moderated.

  19. drid says:

    good programm work 100/100

  20. Rex says:

    Hi! After I install daz loader, can I delete it? Or Do I need to install every reboot of the computer?

Leave a Reply

Your email address will not be published. Required fields are marked *

*